Customer Reviews:
Showing reviews 1-5 of 27
 A Weighty Matter January 3, 2006
Tim (Fishtown, Phila)
93 out of 111 found this review helpful
With these weights I was able to send my Canon Powershot S70 to the bottom of the Atlantic, and I have great faith that they will keep it there. Reliable, and more professional than a brick.
Much Needed Accessory April 8, 2007
E. Arentsen (California)
14 out of 14 found this review helpful
The Canon underwater housings are designed to protect your camera from the elements, whether they are sand, rain, pool, or ocean. For use on the beach, while snorkeling, or taking shots of your kids in a pool there is little or no need to worry about the buoyancy of your camera housing. If you free dive or scuba dive you do not want your camera housing floating out of your hands. These weights are an easy way to adjust the buoyancy of your housing. The kit comes with four weight plates so you can fine tune your housing's buoyancy. I prefer a heavier setup and have added an extra plate compared to what was recommended by Canon. I'm very happy with the setup and they are very easy to use.
1 weight is perfect November 9, 2006
D. Mayo (Altadena, CA United States)
15 out of 17 found this review helpful
I purchased an optional weight kit for my WP-DC80 Underwater Housing (for Canon SD550). Following the instructions to make the camera and housing neutrally buoyant, I attached one of the weights to the tripod attachment spot on the botton of the housing. It worked perfectly.
Weights for Canon Case February 22, 2007
E. Hender (Idaho)
7 out of 7 found this review helpful
Sorry for the guy who sent his camera to the bottom of the Atlantic, but this product is great when you read the instructions! The camera case shows the weight configuration needed to make it and your camera neutrally bouyant - when tightened it stays on great and the camera does NOT sink. The weight kit is a great addition for those who are really going to use the case diving. I did 6 dives and it was great!
they work great! November 17, 2007
Travis McKee (Grapevine, Texas USA)
3 out of 3 found this review helpful
I added two of the weights to the housing for the sd700 and the camera was a little negatively bouyant, which is my preference. I've seen a few complaints that the screw loosens while using so I decided to try something that worked great. Take a small peice of plumbers tape and wrap the screw 2 or 3 times before tightening it up. I used the camera like this for 5 days of diving and never once had to tighten the screw.
Showing reviews 1-5 of 27
|
